NEW CISCO R&S - VOICE - WIRELESS - CCNA v3.0 - CCNP v2.0 LAB KIT

Description

Please contact us, if you have any question.
1(972)-423-6829
Why do I need to buy Hyper Networks Cisco LAB KITs?
Firstly; Cisco made CCNA 200-125 V3 exam harder than the CCNA 200-120 V2 exam.
Cisco wants to make sure you
really
know your stuff on this exam. CCNA 200-125 V3 exam includes
multiple choice, multiple answer, drag-n-drop, interactive router simulations, testlet and simlet question
types. Especially, you need to study with actual devices for understanding interactive router simulations, testlet and simlet question
types. You need to have
a high-level understanding of what is happening for passing the exam. You need to practice on more complex setups and you need to understand very well what is happening. That is why we set up these lab kits and provide you to work with actual devices.
Why do I need a physical router?
You need a physical router because:
*The simulators don't have the ability to give you the
hands on
.
*You need to see what happens when you disconnect a cable.
*You may put a cable in the wrong location or just plain configure the interface incorrectly.
*Dependent on what you do by mistake, you may see either the interface or protocol go down.
*You can do troubleshoot based upon that it should give you a clue of where to start troubleshooting.
*You can see what layer is the interface at and what layer is the protocol at.
* You can find quite quickly which mistakes you make on Router 1 which can affects other Routers.
No simulator can simulate that, so real routers and switches are invaluable.
All Products are fully tested.
Please contact us, if you have any question.
1(972)-423-6829
30 DAYS WARRANTY
Included Items in the lab:
Routers:
1x Cisco2811 256MB Dram/128MB Flash Call Manager Express CME 8.6
2x Fast Ethernet Interfaces
2x Serial Interfaces
IOS 15.1 : c2800nm-adventerprisek9-mz.151-4.M10
1x Cisco1841 256MB Dram /64MB Flash
2x Fast Ethernet Interfaces
1x Serial Interfaces
IOS 15.1(4) IOS c1841-adventerprisek9-mz.151-4.M9
1x Csico1841 256MB Dram/64MB Flash
2x Fast Ethernet Interfaces
1x Serial Interfaces
15.1(4) IOS c1841-adventerprisek9-mz.151-4.M9
Switches:
1x WS-C2960-24TT-L IOS 15.0   c2960-lanbasek9-tar.150-2.SE8
24x Fast Ethernet Interfaces
2x Gigabit RJ45 Interfaces
1x WS-C2960-24TT-L IOS 15.0   c2960-lanbasek9-tar.150-2.SE8
24x Fast Ethernet Interfaces
2x Gigabit RJ45 Interfaces
1x WS-C3560-24PS-S POE (Power Over Ethernet)  CCIE LEVEL SWITCHES, LAYER 3 ,
24x Fast Ethernet Interfaces
2x Gigabit SFP Interfaces
with latest EMI IOS 12.2   c3560-advipservicesk9-tar.122-44.SE6
Wireless Controller and Access Points:
1x AIR-WLC4402-12-K9
Cisco 4400 Series Wireless LAN Controller supports 802.11a/b/g and the IEEE 802.11n draft 2.0 standard
Access Points:
3x AIR-LAP1131AG-A-K9 a/b/g  (Power will be supported from POE switch doesn't need Power Cubes)
Module Cards:
4 x WIC-1DSU-T1-V2 Serial Module Card
Cables:
6x Ethernet Cable
2x Serial Connection Cable
2x Crossover Cable
8x Power Cable
BONUS ITEMS:
2x Cisco CP-7940G IP Phones
1x 12U Desktop Rack
1x Cisco USB to RJ45 console Cable
Bonus DVD:
1x DVD
- SDM Software
- TFTP Software
- Lab examples, questions and answers, manuals, configuration examples.
How Many Routers Do I Need for my Cisco CCNA Lab?
Let`s explain to you what you can do with one, two or three routers.
One router
will give you the ability to run the commands on it and will allow you to memorize the correct syntax and context in which to run the commands.
Two routers
will allow you to be able to see route table information propagate, data propagation and path election. In addition, you will see basic device elections.
Three or more routers
and you will get all the above, more complex topologies and full device elections.
We strongly suggest you buy three router kits.
How Many Switches Do I Need for my Cisco CCNA Lab?
Let`s explain to you what you can do with one, two or three switches.
One switch
will give you the ability to run the commands on the switch and allow you to memorize the correct syntax and context in which to run the commands. It will also allow you to do some of the VLAN labs.
Two switches
will allow you to see VTP Domain & VLAN information propagate. In addition, you will see basic device elections.
Three or more switches
you will get all the above and full device elections.
We suggest to you buy our three switch lab kits because of having the best learning experience.
Please contact us, if you have any question.
1(972)-423-6829
This is a complete WiFi HotSpot package including firewall, WiFi Access Point and Thermal Printer for user access control. It was formerly used in a business I owned in an effort to provide wifi for the patrons. Now I do not need the hardware as I no longer have that business.
With this hardware you can control and limit the time customers have access to free internet, charge for access with pre-configured blocks of time, advertise your goods and services, or any combination of the three. Unlike just passing out the WPA key or running an open AP this allows you (as the host location) to control access to patrons and even limit the time allowed online. Simply print an access ticket on the printer and the user is granted a limited amount of time. A special firmware build also provides for an advertising area on the ticket for coupons, ads etc. This is a complete HotSpot set-up that is plug n play ready.
The following hardware is included as a complete package:
WSG-5000 Wireless PnP Subscriber Gateway -
a compact intelligent gateway integrated with a 4-port port-based V-LAN switch and 22Mbps 802.11b+ wireless connectivity. (802.11b is plenty fast for public WiFi and you can always add a fast AP controlled by the gateway if you have something faster than 25Mbps connection to the internet.) It acts as an hotspot access controller and provides plug and play instant Internet access, advanced security & network management. The WSG-5000 Wireless PnP Subscriber Gateway, which simplified the setup, control, security and management of hotspot Internet access by integrating all the key components you need into a single, easy-to-install and intelligent device, is designed for service providers and system integrator to enhance service performance, increase business exposure and cooperative business operation. With its IP Plug and Play technology, it accepts any client configuration for log-on; The WSG-5000 Wireless PnP Subscriber Gateway immediately recognizes new end-users on the network, remembers returning users and redirects their browser to customized Web pages. There's no need for end-users to change any of their default network, e-mail, or browser settings or load any special software to access Hotspot services.
Thermal Printer -
Prints user access control tickets using common cash register thermal paper.
ZyXEL ZyWall 2 firewall -
The ZyWALL 2 is the ideal secure gateway for al data passing between the Internet and the LAN. By integrating NAT, firewall and VPN capability, ZyXEL's ZyWALL 2 is a complete security solution that protects your intranet and efficiently manages data traffic on your network. The embedded web configurator is easy to operate and totally independent of the operating platform you use. You should have an Internet account and access already set up.