WiFi Business Hotspot w/ Firewall - complete turnkey setup

Description

This is a complete WiFi HotSpot package including firewall, WiFi Access Point and Thermal Printer for user access control. It was formerly used in a business I owned in an effort to provide wifi for the patrons. Now I do not need the hardware as I no longer have that business.
With this hardware you can control and limit the time customers have access to free internet, charge for access with pre-configured blocks of time, advertise your goods and services, or any combination of the three. Unlike just passing out the WPA key or running an open AP this allows you (as the host location) to control access to patrons and even limit the time allowed online. Simply print an access ticket on the printer and the user is granted a limited amount of time. A special firmware build also provides for an advertising area on the ticket for coupons, ads etc. This is a complete HotSpot set-up that is plug n play ready.
The following hardware is included as a complete package:
WSG-5000 Wireless PnP Subscriber Gateway -
a compact intelligent gateway integrated with a 4-port port-based V-LAN switch and 22Mbps 802.11b+ wireless connectivity. (802.11b is plenty fast for public WiFi and you can always add a fast AP controlled by the gateway if you have something faster than 25Mbps connection to the internet.) It acts as an hotspot access controller and provides plug and play instant Internet access, advanced security & network management. The WSG-5000 Wireless PnP Subscriber Gateway, which simplified the setup, control, security and management of hotspot Internet access by integrating all the key components you need into a single, easy-to-install and intelligent device, is designed for service providers and system integrator to enhance service performance, increase business exposure and cooperative business operation. With its IP Plug and Play technology, it accepts any client configuration for log-on; The WSG-5000 Wireless PnP Subscriber Gateway immediately recognizes new end-users on the network, remembers returning users and redirects their browser to customized Web pages. There's no need for end-users to change any of their default network, e-mail, or browser settings or load any special software to access Hotspot services.
Thermal Printer -
Prints user access control tickets using common cash register thermal paper.
ZyXEL ZyWall 2 firewall -
The ZyWALL 2 is the ideal secure gateway for al data passing between the Internet and the LAN. By integrating NAT, firewall and VPN capability, ZyXEL's ZyWALL 2 is a complete security solution that protects your intranet and efficiently manages data traffic on your network. The embedded web configurator is easy to operate and totally independent of the operating platform you use. You should have an Internet account and access already set up.
Listing Revised 5/23/2020
LIMITED TIME ONLY
FOLLOWING UNITS WILL BE UPGRADED
1x CISCO 1841 Router 2x Fast
Ethernet
[256MB Dram/64MB Flash] Latest IOS: 15.1
UPGRADED TO
1x CISCO 1921 Router 2x Gigabit Ethernet [512MB Dram/256MB Flash] Latest IOS: 15.7
----------------------------------------------------------------------------------------------------------------------------------------------------------
2x CISCO 2610XM 1x Fast Ehternet 128/32 Router  IOS: 12.4T
UPGRADED TO
2x CISCO 1921 Router 2x Gigabit Ethernet [512MB Dram/256MB Flash] Latest IOS: 15.7
----------------------------------------------------------------------------------------------------------------------------------------------------------
2x WS-C2950-24 LAYER 2 Switch
24x  Fast Ethernet  Interfaces  IOS 12.1
UPGRADED TO
2x WS-C2960-24 LAYER 2 Switch       2x Gigabit Ethernet
24x  Fast Ethernet  Interfaces IOS 15.0
Included Items:
Routers:
3 x CISCO 1921 Router 2x Gigabit Ethernet [512MB Dram/256MB Flash] Latest IOS: 15.7
4x Serial Interfaces in total
Switches:
2x WS-C2960-24 LAYER 2 Switch
2x Gigabit Ethernet
24x  Fast Ethernet  Interfaces IOS 15.0
Cables and Units:
2 x T1 Serial Connection Cable
3x Ethernet Cable
1x Crossover Cable
1x DB9 to RJ45 Console Cable
5x Power cable
Rack:
1x 12U Desktop Rack with Rack mounts for Switches and Routers
Bonus DVD:
1x DVD
- SDM Software
- TFTP Software
- Lab examples, questions and answers, manuals, configuration examples.
With this lab kit we will include DB9(COM) to RJ45 Console cable, if you don't have built in COM interface or COM adapter on your Laptop, PC etc... you will need USB Console cable.
FOR CISCO USB CONSOLE CABLE PLEASE USE FOLLOWING LINK
https://www.ebay.com/itm/Cisco-Console-Cable-USB-RJ45-for-CCNA-CCNP-CCIE-LAB-KIT-300-101/261732924022?hash=item3cf07f7a76:g:ZhgAAOSwD0lUa6nO:sc:USPSFirstClass!75074!US!-1
Shipping
- Tracking number will be provided immediately after shipping.
- We will charge additional Shipping charges to Hawaii, Alaska and Puerto Rico.
-The item is shipped within 1-3 business days after the completion of the auction.
-International Buyers shall ask for shipping quote before buying the item.